Standard Details for Public Works Construction

Disclaimer

The Oakland Public Works Bureau of Engineering and Construction Engineering Design and Right-of-Way Division makes these documents available on an “as is” basis. The attached file(s) and the contained information is (are) provided as a public service by the City of Oakland. All warranties and representations of any kind with regard to said documents are disclaimed, including the implied warranties of merchantability and fitness for a particular use. The City of Oakland does not warrant the documents against deficiencies of any kind.

The City of Oakland makes no claims, promises or guaranties about the accuracy, completeness, or adequacy of the contents of the files, and expressly disclaims liability for errors and omissions thereof. No warranty of any kind, implied, expressed or statutory, is given. Since revisions or additions to the design file standards may occur at any time, the user(s) of these files by the use thereof agree(s) to hold the City of Oakland, its officers, agents, and employees from and against any and all claims, suits, losses, damages or costs, including reasonable attorney’s fees, arising from the use of the design file standards, and such harmless of any and all liabilities arising from the use of these files. References in these files to any specific commercial products, processes, or services, or the use of any trade, firm or corporation name is for the information and convenience of the public, and does not constitute endorsement, recommendation, or favoring by the City of Oakland.

CITY OF OAKLAND

STANDARD DETAILS FOR PUBLIC WORKS CONSTRUCTION

2002 EDITION

STANDARD DETAILS TITLE

DRAWING NO.

NOTE: For Transportation, see OakDOT Design Details for Transportation Facilities.

I.

STREET IMPROVEMENTS

CONCRETE CURB, GUTTER, AND SIDEWALK

S-1

CONCRETE DRIVEWAY

S-2

CURB RAMP DETAILS

S-3

CURB RAMP DETAILS TYPICAL SECTIONS

S-6


CURB RAMP DETAILS DETECTABLE WARNINGS

S-7


CURB RAMP DETAILS GENERAL NOTES

S-8


MONUMENT DETAIL

S-9

II.

SEWER/DRAINAGE STRUCTURES



CONCRETE COLLAR AND BEDDING

D-1


LAMPHOLE, CLEANOUT AND DROP CONNECTION

D-2


TYPE “A” INLET

D-3


TYPE “B” INLET

D-4


TYPE “C” INLET

D-5


TYPE “D” INLET

D-6


D-3 INLET DETAILS (REINFORCED CONCRETE)

D-7


TYPE E-3 INLET AND TYPE E-4 INLET

D-8


TYPE F INLET

D-9


S-2 INLET (REINFORCED CONCRETE)

D-10


MANHOLE – TYPE 1

D-11


MANHOLE – TYPE 2 (FOR 36” TO 75” DIA. PIPE CONDUIT)

D-12


SIDEWALK UNDERDRAIN

D-13


STORM WATER DRAIN (WITH HANDHOLE)

D-14


STORM WATER DRAIN (WITHOUT HANDHOLE)

D-15


ENERGY DISSIPATOR 1

D-16


ENERGY DISSIPATER 2

D-17


REINFORCED CONCRETE DITCH

D-18


RUBBLE OR BURLAP SACKED CONTRETE ENDWALL AND HEADWALL

D-19


TRASH RACK

D-20


MANHOLE EXTENSION RINGS (CAST IRON)

D-21


TRENCH BACKFILL AND PAVEMENT REPLACEMENT TYPES

D-22.0


TRENCH BACKFILL AND PAVEMENT REPLACEMENT TYPES NOTES

D-22.1


SEWER CROSSING DETAIL

D-23


HOUSE CONNECTION CLEANOUT (2-WAY CLEANOUT)

D-24


GROUND WATER GAGE DETAILS

D-25


CHECKDAM AND PIPE ANCHOR DETAILS

D-26


CONCRETE EROSION PROTECTION DETAIL

D-27


TRESTLED SEWER DETAIL

D-28


STORM CONDUIT CONNECTION DETAIL

D-29


SPECIAL TRENCH PAVING DETAIL ASPHALT CONCRETE STREET

D-30


SPECIAL TRENCH PAVING DETAIL, PORTLAND CEMENT CONCRETE STREET WITH ASPHALT OVERLAY OR TYPE B STREET

D-31


UTILITY CROSSING OVER SEWER LATERAL

D-32


UTILITY CROSSING UNDER SEWER LATERAL

D-33


CATCH BASIN AND SANDBAG SEDIMENT BARRIER

D-34


SPECIAL TRENCH DETAIL FOR ROCKSAW METHOD OF TRENCH EXCAVATION

D-35

III.

MISCELLANEOUS



PEDESTRIAN BARRICADE

M-1


CHAIN LINK FENCE

M-2


STEEL PIPE GATE

M-3


GUIDELINES FOR TEMPORARY PEDESTRIAN WALKWAY CANOPY

M-4


GUIDELINES FOR TEMPORARY PEDESTRIAN PEDESTRIAN WALKWAY CANOPY

M-5


PARKING STANDARDS

T-1

IV.

ELECTRICAL



STANDARD SYMBOLS AND ABBREVIATION



SHEET 1 OF 3

E-1


SHEET 2 OF 3

E-2


SHEET 3 OF 3

E-3


COLOR & CONFIGURATION USED FOR PAINTING ELECTRICAL UTILITIES



SHEET 1 OF 3

E-4


SHEET 2 OF 3

E-5


SHEET 3 OF 3

E-6


ARRANGEMENT OF CURB BOX & CONDUITS

E-7


STREET LIGHTING STANDARD

E-8


PRECAST, NON-CONCRETE, STANDARD CURB BOX

E-9


25-FOOT LIGHTING STANDARD

E-10


OVERHEAD SERVICES FOR ELECTROLIERS

E-11


BORED-HOLE FOUNDATION-30’ STANDARD WITH LUMINAIRE MAST ARM



SHEET 1 OF 3

E-12


SHEET 2 OF 3

E-13


SHEET 3 OF 3

E-14


BORED-HOLE FOUNDATION-30’ STANDARD WITH LUMINAIRE & 20’ (MAX.) SIGNAL MAST ARMS



SHEET 1 OF 3

E-15


SHEET 2 OF 3

E-16


SHEET 3 OF 3

E-17


BORED-HOLE FOUNDATION-30’ STANDARD WITH LUMINAIRE & 30’ (MAX.) SIGNAL MAST ARMS



SHEET 1 OF 3

E-18


SHEET 2 OF 3

E-19


SHEET 3 OF 3

E-20


ANCHOR BOLTS FOR PEDESTALS & STANDARDS

E-21


STREET LIGHT STANDARDS – 30’ MOUNTING HEIGHT WITH 15’ SIGNAL MAST ARM

E-22


STREET LIGHT STANDARDS – 30’ MOUNTING HEIGHT WITH 20’ SIGNAL MAST ARM

E-23


STREET LIGHT STANDARDS – 30’ MOUNTING HEIGHT WITH 30’ SIGNAL MAST ARM

E-24


STREET LIGHT STANDARDS – 25’ MOUNTING HEIGHT WITH 15’ SIGNAL MAST ARM

E-25


BORED-HOLE FOUNDATION ELECTROLIER IN MEDIAN



SHEET 1 OF 2

E-26


SHEET 2 OF 2

E-27


SCHOOL CROSSING – SIGN STANDARDS – 15’ MAST ARM

E-28


STANDARD STREET LIGHT SPLICES – MULTIPLE SYSTEMS

E-29


TYPICAL LOOP INSTALLATION DETAILS



THIS SHEET LEFT BLANK

E-30


THIS SHEET LEFT BLANK

E-31


GROUND STRAPS & U-BOLTS FOR ELECTROLIER & TRAFFIC SIGNAL STANDARD FOUNDATIONS

E-32


PEDESTAL MOUNTING FOR TRAFFIC SIGNAL CONTROLLER

E-33


COLOR CODING AND CONDUCTOR NUMBERING FOR WIRE AND CABLE TRAFFIC SIGNAL SERVICE ARRANGEMENT

E-34


THIS SHEET LEFT BLANK

E-35


THIS SHEET LEFT BLANK

E-36


THIS SHEET LEFT BLANK

E-37


INSTALLATION OF TRAFFIC SIGNAL STANDARD 4-INCH PIPE SIZE



SHEET 1 OF 2

E-38


SHEET 2 OF 2

E-39


FOUNDATION FOR TRAFFIC ACTUATED CONTROLLER



SHEET 1 OF 2

E-40


SHEET 2 OF 2

E-41


TRAFFIC SIGNAL MOUNTING SHOP-MADE PARTS

E-42


TRAFFIC SIGNAL MOUNTING – TYPE T-2LT, T-1LT/NS, T-1LT/FS



SHEET 1 OF 2

E-43


SHEET 2 OF 2

E-44


TRAFFIC SIGNAL MOUNTING – TYPE T-2LT, T-1LT/NS, T-1LT/FS



SHEET 1 OF 2

E-43


SHEET 2 OF 2

E-44


TRAFFIC SIGNAL MOUNTING – TYPE T-2V-2P, T-2V-1P, T-2V, T-2P



SHEET 1 OF 2

E-45


SHEET 2 OF 2

E-46


TRAFFIC SIGNAL MOUNTING – TYPE T-3V-2P, T-3V-1P, T-3V



SHEET 1 OF 2

E-47


SHEET 2 OF 2

E-48


TRAFFIC SIGNAL MOUNTING – TYPE S-1V-2P, S-1V-1P, S-1V, S-1P



SHEET 1 OF 2

E-49


SHEET 2 OF 2

E-50


TRAFFIC SIGNAL MOUNTING – TYPE S-2V-1P, S-2V-1P, S-2V, S-2P



SHEET 1 OF 2

E-51


SHEET 2 OF 2

E-52


MOUNTING HEIGHTS FOR SIDE-OF-POLE SIGNAL HEAD MOUNTING TRAFFIC SIGNAL SERVICE ETER-SOCKET MEG. DETAILS ON CONTROLLER CABINET

E-53


THIS SHEET LEFT BLANK

E-54


THIS SHEET LEFT BLANK

E-55


TRAFFIC SIGNAL MOUNTING – TYPE M-1V

E-56


WATERTIGHT SPLICING CHAMBER

E-57


TRAFFIC SIGNAL MOUNTING – TYPE S-2LT, S-1LT/NS, S-1LT/FS



SHEET 1 OF 2

E-58


SHEET 2 OF 2

E-59


TRAFFIC SIGNAL MOUNTING – TYPE T-1V-2P, T-1V-1P, T-1V, T-1P



SHEET 1 OF 2

E-60


SHEET 2 OF 2

E-61


TRAFFIC SIGNAL STANDARD – 22’ NOM. MOUNTING HEIGHT WITH 15’ TO 20’ (MAX.) MAST ARM

E-62


SPLICING CHAMBER CABLE FANNING AND CONNECTORS

E-63


MOUNTING ADAPTOR CABLE FANNING AND CONNECTORS

E-64


TRAFFIC SIGNAL MOUNTING – TYPE T-1V-1V(12)-2P, T-1V-1V(12)-1P, T-1V-1V(12)



SHEET 1 OF 2

E-65


SHEET 2 OF 2

E-66


TRAFFIC SIGNAL MOUNTING – TYPE S-1V-1V(12)-2P, S-1V-1V(12)-1P, S-1V-1V(12)



SHEET 1 OF 2

E-67


SHEET 2 OF 2

E-68


TRAFFIC SIGNAL STANDARD – 23’ MOUNTING HEIGHT WITH 30’ SIGNAL MAST ARM

E-69


28’-6” DUPLEX STREET LIGHT – STANDARDS

E-70


28’-6” SINGLE LIGHT STREET LIGHT – STANDARDS

E-71


FOUNDATION REINFORCING DETAILS FOR LIGHT STANDARDS

E-72


SPREAD FOUNDATION FOR LIGHT STANDARDS

E-73


SITEWORK AND FOUNDATION – GENERAL NOTES

E-74


FOUNDATION DETAILS FOR SLOPING CONDITIONS

E-75


RETAINING WALL FOR LIGHT STANDARDS



SHEET 1 OF 3

E-76


SHEET 2 OF 3

E-77


SHEET 3 OF 3

E-78


THIS PAGE LEFT BLANK

E-79


REINFORCING DETAILS FOR TRAFFIC SIGNAL STANDARD



THIS PAGE LEFT BLANK

E-80


REINFORCING DETAILS FOR CONTROLLER CABINET FOUNDATION



THIS PAGE LEFT BLANK

E-81


TRAFFIC SIGNAL STANDARD – 22’6” MOUNTING HEIGHT WITH 25’ SIGNAL MAST ARM

E-82


STREET LIGHT STANDARD – 30’ MOUNTING HEIGHT WITH 25’ SIGNAL MAST ARM



SHEET 1 OF 2

E-83


SHEET 2 OF 2

E-84


STREET LIGHT STANDARD – 30’ MOUNTING HEIGHT WITH 30’ SIGNAL MAST ARM

E-85


AUDIBLE PEDESTRIAN SIGNAL MOUNTING DETAILS

E-86


INSTALLATION OF CAST IRON ELECTROLIER



SHEET 1 OF 4

E-87


SHEET 2 OF 4

E-88


SHEET 3 OF 4

E-89


SHEET 4 OF 4

E-90


CENTER POLE FOR LARGE CAST IRON ELECTROLIER

E-91


TYPICAL CROSS SECTION FOR ROCKWHEELING AND TRENCH DETAIL

E-92

V.

REFERENCE DETAILS



(CALTRANS STANDARD PLANS 2006)



SIGNAL AND LIGHTING STANDARDS CASE 1 ARM LOADING

ES-7C


SIGNAL AND LIGHTING STANDARDS CASE 2 ARM LOADING

ES-7D


SIGNAL AND LIGHTING STANDARDS CASE 3 ARM LOADING

ES-7E


SIGNAL AND LIGHTING STANDARDS CASE 4 ARM LOADING

ES-7F


SIGNAL AND LIGHTING STANDARDS CASE 5 ARM LOADING

ES-7G


SIGNAL AND LIGHTING STANDARDS CASE 5 ARM LOADING

ES-7H


SIGNAL AND LIGHTING STANDARDS DETAILS NO. 2

ES-7N

Posted: August 31st, 2018 3:44 PM

Last Updated: September 19th, 2023 2:39 PM

Was this page helpful?

Your feedback will help us improve our website. We cannot reply individually to all feedback.
Your feedback will help us improve our website. We cannot reply individually to all feedback.
Your feedback will help us improve our website. We cannot reply individually to all feedback.